Post by kately on Apr 2, 2024 22:09:43 GMT -5
The borehole north finding system based on MEMS north finder needs to overcome the complex environment in borehole north finding. Shock vibration is one of the main factors affecting the accuracy of borehole north finding by MEMS north finder. When shock vibration occurs, the core component of MEMS gyro is sensitive not only to the horizontal component of earth rotation, but also to the angular velocity component generated by shock vibration interference. Therefore, in order to improve the precision of borehole north finding while drilling, it is necessary to compensate the error of MEMS north finder under shock vibration.
1.The influence of vibration on borehole north finding
When the drill bit is drilling, it will not only cause the tilting of the base of north seeker, but also cause high frequency interference due to shock vibration. In practice, the situation is very complicated, MEMS gyroscope will be sensitive to other signals in addition to the Earth's angular rate component, such as drilling the base Angle to produce additional angular speed. The final output of a MEMS north seeker consists of a superposition of many signals. In this section, the Angle vibration of drilling bit is taken as the main research object, and the error caused by it is analyzed. Bit drilling will make the transverse roller and pitch axis of MEMS north finder do different angular vibration, the specific characteristics are as follows:
In Formula 1, Bm and rm represent the vibration amplitude of the MEMS north seeker around the pitch axis and transverse roller axis, where is the vibration frequency, then the influenced angular velocity brought about by the drilling bit is:
On the basis of two-position north finding, the output after adding only vibration error is
The north finding Angle obtained by the above formula 3 is
Images are not easily displayed in this forum, to view the full text, please click hereļ¼ www.ericcointernational.com/application/shock-vibration-compensation-of-mems-north-finder.html
If you are interested in it, please contact us:
Mobile: +8613992884879
Email: info@ericcointernational.com
Wechat: 13992884879
WhatsApp: +8613992884879
1.The influence of vibration on borehole north finding
When the drill bit is drilling, it will not only cause the tilting of the base of north seeker, but also cause high frequency interference due to shock vibration. In practice, the situation is very complicated, MEMS gyroscope will be sensitive to other signals in addition to the Earth's angular rate component, such as drilling the base Angle to produce additional angular speed. The final output of a MEMS north seeker consists of a superposition of many signals. In this section, the Angle vibration of drilling bit is taken as the main research object, and the error caused by it is analyzed. Bit drilling will make the transverse roller and pitch axis of MEMS north finder do different angular vibration, the specific characteristics are as follows:
In Formula 1, Bm and rm represent the vibration amplitude of the MEMS north seeker around the pitch axis and transverse roller axis, where is the vibration frequency, then the influenced angular velocity brought about by the drilling bit is:
On the basis of two-position north finding, the output after adding only vibration error is
The north finding Angle obtained by the above formula 3 is
Images are not easily displayed in this forum, to view the full text, please click hereļ¼ www.ericcointernational.com/application/shock-vibration-compensation-of-mems-north-finder.html
If you are interested in it, please contact us:
Mobile: +8613992884879
Email: info@ericcointernational.com
Wechat: 13992884879
WhatsApp: +8613992884879